Intended for discharge currents from 3.5 C5A to 7 C5A
Railway: Ignition of locomotives and diesel-electric generators in stations
Mines: Mining locomotives
Factories and institutions: Ignition of diesel-electric generators
CHARACTERISTICS AND ADVANTAGES:
They are applied as mobile and stationary batteries, assembled in portable cases or on shelves
High resistance to mechanical loads
High resistance to electrical overcharge and deep discharge
Huge number of charge-discharge cycles
Work in the temperature span -40 to +50°C
Batteries can be recycled
Fast and simple assembly, easy maintenance and handling
Small inner resistance
Electric characteristics of batteries fully comply with the International Electro-technical Commission’s standard IEC 60623
Krusik’s open prism-shaped Ni-Cd batteries belong to the group of batteries with alkaline electrolyte. The label prism-shaped is telling of the battery shape. According to the construction of the electrode, the battery belongs to the group of batteries with pocket plates, while the battery casing is made of steel or propylene. According to the discharging regime the KPH type batteries belong to the group of batteries that are discharged with currents 3.5-7 C5A.
TERMS AND DEFINITIONS
Nominal voltage of the battery (operating voltage) is 1.2 V. In order to achieve higher values of voltage than 1.2 V, batteries are connected serially.
Nominal capacity of the battery is the five-hour capacity (C5) at the temperature 20 ± 5°C, stated as electricity in ampere hours (Ah) and labeled C5, Ah. Nominal charge/discharge current is: I=0.2 C5A. Time of charging the battery with nominal current is 7.5-8 hours which makes the battery fully charged. The charging factor is: F=150-160% C5Ah. Time of discharging with nominal current I=0.2 C5A to the voltage of 1.0 V/cell is 5 hours at the minimum. Electrolyte in the battery is the KOH (potassium-hydroxide) solution in distilled water, with density 1.2 ± 0.01g/cm3.
Typical discharge curves for KPH type Ni-Cd cell at 20°C